Book Services

 

 

What are your ideas concerning What Would Cause My Electric Water Heater to Stop Working??

Many modern-day homes take advantage of an electric hot water heater for their heating system, as a result of its benefit as well as convenience of use. Nevertheless, similar to any other electrical devices, problems might arise with its usage, all of a sudden. It can be truly irritating to get up to a cold shower as opposed to a hot one or having your bath with water that isn't warm enough or even as well warm. Whatever the case may be, hot water heater troubles can be quite stressful. Thankfully, we have actually made a checklist of possible services to your hot water heater concerns. There are a variety of factors that might trigger most of these issues, maybe a problem with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for security. Whatever the trouble is, getting it fixed should not position way too much of a problem if you adhere to these actions:

 

Examine Your Power Supply:

As basic as this may seem, it is extremely essential. Without adequate power, your water heater will not work. So the first thing to do when your water instantly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the concern, simply turn it off and on once again. Change any kind of busted or damaged fuse. Check the device with power after these adjustments to see if it's now working.

 

Check the Burner in the Hot Water Heater:

If it's not a power problem, after that attempt taking a look at your heating element if it is still functioning. Examine each of your burner to be sure the issue isn't with any one of them. If any one of them is damaged, change that part and afterwards examine whether the warm water is back on.

 

Check Your Thermostat:

If your water heater still isn't working or the water coming out isn't hot enough, you may need to inspect the temperature settings on your upper thermostat. Guarantee the breaker is switched off before doing anything. Open the gain access to panel as well as press the red button for temperature reset above the thermostat. This ought to help warm the water. Transform the breaker back on and also examine if the trouble has been resolved.

 

Call A Professional:

If after replacing all defective parts and also resetting your temperature level, the water heater still isn't working, you may need to call a specialist plumber for a specialist point of view. The trouble with your heater could be that the hot and cold faucets have actually been switched or it may be undersized for the amount of hot water needed in your home. Whatever the case may be, an expert plumber would assist fix the problem.

 

Conclusion

Water heater troubles are not constantly significant. Most of them are because of minor problems like a blown fuse or worn-out heating element. Changing the damaged parts ought to do the trick. Nonetheless, if you are still incapable to resolve the problem, give a call to your nearest plumber ahead to get it dealt with.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

We hope you enjoyed reading our part about What Would Cause My Electric Water Heater to Stop Working?. Thanks a ton for spending some time to browse our posting. Do you know about another individual who is excited by the niche? Why not share it. Thanks for your time. Visit us again soon.

Book Today!